Infiniti 36GT, day-sailor, delivered in May 2013.
State of the art design. Exclusive DSS foil technology.
Unequalled performance and ride. Cruising or racing.
Full carbon fibre build by Danish Yachts. Southern Spars rig. North Sails. Carbon E6 rigging.
Custom DSS foil drive system with cockpit controls
Full Harken winch package including Harken 46 Quattro primary winches
Spinlock jammers and clutches
Propulsion Engine: 1 x Yanmar 1GM 10 / 9HP / Diesel inboard engine with retractable drive system
Fuel tank: 30lts
Keel fin: Carbon keel fin + carbon keel trunk
Bulb: Lead bulb
Wing foil: Carbon foil
Rudder: Custom Isotop Carbon rudder stock and blade
Carbon wheel: 2 x Steering wheels 900mm diameter w/3 carbon spokes + carbon rim w/ wooden inserts
Pedestal: 2 x carbon pedestals through deck installation for steering lines
Emergency steering system: Stainless steel emergency tiller in accordance to LSAF special regulations
STBD electrical pump: 12v Sahara S1100 gph
Port electrical pump: 12v Sahara S1100 gph
Bilge alarm: Bilge alarm mounted externally
DSS Wing Foil System
Foil drive and motion system: Marine grade rollers and drive system
Electrical motor to move foil.
Cockpit switches and buttons
Propeller lifting system
Propeller box: Carbon fibre.
Propeller box hull case: Carbon fibre, bonded and laminated to the hull.
Universal joint: Marine grade joint
Instrument display repeaters at mast.
Engine start battery bank: Optima batteries
House battery bank: Optima batteries
Navigation lights: Tri-colour masthead
Interior lights: Led lights
Triple unit halyard stopper: 2 x Spinlock XCS0814 silver triple unit. Halyards 2 gennaker, 1 jib, 1 main 2 reef lines
Single unit stopper: 2 x Spinlock XCS0914 silver single unit. Deflector and Outhaul
Single unit cam cleat: 3 x Spinlock PXR Cam Cleat PXR0810/SW for boom vang and cunningham control line
JIB sheet control: 2 x Kohlhoff loop alu diam.46 ring KH-LRING46
JIB sheet control: 2 x Harken diam.57 Carbo T2 loop soft attach block #21K1
Main sheet system: Harken- [#2604x1/#2602x2/#2148x1/#144x1/#2135x1/#2646x1]
Gennaker sheet blocks: 2 x Harken diam. 57 high load sheave; installer in a carbon sheave box
Tack line control: 2 x Spin lock side mount. Stopper XCS-SMNT HPW
Mast base blocks: 8 x Harken diam.57 mast base halyard block #1988
Primary winches: 2 x Harken performa quatro 2 drums 4 speed self-tailing [46STQP]
Cabin top winches: 2 x Harken performa 2 speed self-tailing [40.2STP]
Running BS winches: 2 x Harken performa 2 speed self-tailing [40.2STP]
Mooring cleat: stainless steel X-foldbar cleat 153mm
Lifelines: 4 x Stainless steel
Stanchions: 8 x Stainless steel
Pulpit: Stainless steel
Stern push pit: 2 x stainless steel
Forward hatch: Lewmar 18" low profile hatch
Aft hatch: Carbon fibre flush
Winch handles: 4 x Harken aluminium, black handles 2 x Speedgrip #B10A5G / 2 x Speedgrip #B8A5G
Ensign staff: Carbon fibre wing section profile
Manual compass: plastimo .
Lashing for blocks: 15 x Spectra lashing for blocks attachments
Foot bars: 4 x Carbon fibre, clear finish
Tweaker block: Kholhoff Loop block 45 w/diamond knot
Cockpit tweaker control: 2 x Harken Ball bearing cam cleat #150
2 x Fire extinguishers: as required by EU standard and ISAF Spec. Marine Grade
1 x life raft: 8 men life raft EU standard
8 x Life vests: as required by EU standard and ISAF Spec.
1 x anchor with 2 metres chain: as required by EU standard and ISAF Spec.
4 x fenders
All sails by North Sails, Denmark
Mainsail and boom cover: 44.4m2 - 3Di + Fully battened
Light Jib: 3Di 105% 30.5m2 + 1 full batten 3 leech battens
Medium Jib: 3Di 90% 20m2 + 1 full batten 3 leech battens
Heavy Jib: 3Di 105% 30.5m2 + 1 full batten 3 leech battens
A1 ASYMMETRIC - Gradient Superlite 40
A2 ASYMMETRIC - Gradient Superkote 60
A5 ASYMMETRIC - Gradient Maxikote 150
Storm Jib - C-cut Polyester Nordac
Quad: Gradient Aramid Laminate T1 ZL06
5 x Bunks: Carbon fibre there are no pipecots, white finish according to interior coating
Bunk lee cloths: Aluminium tube, according ISAF Spec. Reg.
Carbon fibre portable toilet
5 x Inspection hatches: Circular watertight. Colour white according interior coating
Mast: High modulus Carbon, 2 Spreader, Section 176m. Regatta split for transport. Clear coat
Boom: Standard Modulus carbon and foam core box boom. Clear coat
Vang: Aluminium telescopic gas strut. Integral 3:1 system
Bowsprit: Carbon Fibre moulded to hull - removeable
Mast jack: Internal hydraulic jacking cylinder Enerpac 10T all system fittings included
Master step: Female type aluminium mast base. Fore & Aft adjustment by bolts
Wind instruments: Located at Mast head
Windex: 12V system with windex light
Standing rigging: EC5 Carbon rigging complete package, including tangs, turnbuckles, seats and misc. fittings
Running backstay: 5T Kevlar eye to eye
Backstay deflector: x 2
Forestay foil: hank on headsails, no foil
Instrument bracket: carbon fibre
Chainplates bushing P&S: x 2 - Stainless steel 316, laminated to hull deck joint
Chainplates pins P&S: x 2 - Stainless steel 316
Forestay toggle and pin: Stainless steel 316
Hull below WL coating: white anti-fouling system
Hull ext. coating: Alexseal
Deck ext. coating: Alexseal
Interior coating aft: as built sealed with wax
Peppermint hull and cockpit and snow white deck.
The interior is Alexseal white satin.
Keel, bulb, rudder and foil: Nautix white anti-fouling as per hull
All speeds, measurements, capacities, consumptions, etc., may be approximate or estimated. Specifications provided for information only. Data was obtained from sources believed to be reliable and is not guaranteed by Owner or Brokers. Buyer assumes the responsibility to ascertain the correctness of all data contained herein and otherwise provided and must instruct his agent and surveyors to confirm all details for accuracy prior to purchase. Subject to prior sale, price and inventory change, or withdrawal from market without notice.