Stay Current
Boats Priced to Move!
Sent to You Weekly!
Insert Your
E-mail Address

Presented by:
31' Ocean
Photo 1 of 23

This Ocean Master is located here at our facility in Noank, CT. and is in ABSOLUTE PRESTINE CONDITION!!! YOU WILL ABSOLUTLY NOT FIND A CLEANER BOAT!! SHOWS BETTER THAN NEW!!
Ocean Master, "bullet-proof" means just that. Ocean Master hulls are so overbuilt they will easily stop a large caliber bullet fired at point blank range. This was true of the first hull back in 1974 and is still true of the very latest hull being built. By the way, that first 31’ from 1974 is still going strong. But this is only one part of the story. Ocean Master's philosophy is to overbuild these boats in every way possible. They use the highest quality materials and only proven construction techniques.

It all starts with the hull. Every Ocean Master is 100% hand laid to achieve optimum strength. Depending on the model, either 14 or 20 layers of Nytex biaxial and stitched 2415 fiberglass. We know of no other manufacturer who uses this much fiberglass in their hulls. In addition, they employ top quality vinylester resins and NPG gelcoats to stand up to years of hard use.

The stringer system is equally impressive. They use massive, full height, all fiberglass stringers. These stringers are completely fiberglassed into the hull making a truly one piece structure. This is much more time consuming and expensive than simply tabbing the stringers into place.

The innerliner deck of each Ocean Master is fully vacuum bagged with vinylester compound to ensure a complete bond between the fiberglass and core material. This produces a deck that is very strong and incredibly stiff. When you walk on an Ocean Master deck, you notice it immediately. The innerliner deck is then bonded to the sides of the hull and the stringer system using premium vinylester bonding compound. The console is then attached to the deck using state of the art methacrylate adhesive (as opposed to just screwing it down). The end result is a massive, rock-solid hull that is arguably the strongest on the market. Some call this overkill. But when you’re 100+ miles from shore and the seas kick up, you’ll agree that it is the ONLY way to build a sportfishing boat.
Specifications, with Equipment and Information:
- Length: 31' 0"
- LOA: 31' 0"
- Displacement: 9500 lbs
- BEAM: 10' 3"
- DRAFT: 1' 4"
- Engine(s): Yamaha
- Hours: 360
- HP: 250 each
- Fuel: 300 gallons
- Water: 30 gallons
- Holding: yes gallons
- Hull Construction: Fiberglass
- Manufacturer: Ocean
- Model: Master
Electronics / Navigation

VHF Radio
Furuno 24 Mile Radar System
Raytheon Hydraulic Autopilot System
Furuno Chartplotter

3 Deep Cycle Marine Batteries
3 Selector Switches
Full custom mooring cover (2 piece)
Fortress Anchor with 20' chain & 300' of rode
(2) bilge pumps
Boat Hook
Fire Ext.
First Aid Kit
Life Preservers
Search Light
Horn / Bell
Cockpit cushions
Cockpit Cover
Stereo System
Winter Cover
Many Custom Options
Check out other listings from Spicer's Brokerage Sales!
Sea Ray  For Sale-1998 Sea Ray-Noank, CT
31' Sea Ray
Cal SailBoat For Sale-1983 Cal-Noank, CT
31' Cal
Please call or email us with any questions.
93 Marsh Road
Noank, CT 06340
Telephone: (860) 536-4978
Fax: 860-536-4406

Back to Top

Details of this vessel are offered in good faith by the Company. The Information cannot be guaranteed; therefore it is up to the Buyer, his Agents, or his Surveyors to verify.

Make an Offer Anytime!!
Just click "Email Us" from the Listing Above
~ Make an Offer ~ Get A Great Deal ~
Check out all the Used Yachts for Sale, Used Powerboats for Sale or Used Boats for Sale in the Special Sections...
Remember to Email Your Offer!!