"Tayana Dynasty 72"
Photo 1 of 1
With the world renowned pedigree combination of Ta Yang Yacht Builders, Andrew Winch Designs, and Bill Dixon Naval Architects, the Tayana Dynasty 72 ranks as an exceptional high performance cruising yacht. Space abounds in the Dynasty 72, with two spacious cockpits and a sunbathing area on the deck. The central cockpit houses twin steering positions with outdoor dining for eight and access forward into the pilothouse. All control and command equipment is readily available for minimal crew handling. The aft cockpit is accessed from the large owner's cabin and provides a pleasant seating area which opens out through a drop-down transom to the bathing platform. The Dynasty is very much a semi-custom yacht. The interior styling, furniture, and fabrics will reflect the owner's ideals and will blend with an extensive range of high quality fittings and equipment. The technical specification of the yacht will be to a very high standard. Three interior styles have been developed by Andrew Winch. Two owner versions each have four staterooms but different positions for the galley; a charter version has six double cabins with en suite heads. All versions have separate crew quarters, and all versions have the magnificent split level pilot house connecting the forward and aft lower accommodation levels. Custom interiors are available to fit the needs of you and your crew. Ta Yang has been constructing first class yachts for many years. The reputation of Chinese craftsmen over thousands of years is renowned, and it is the combination of their skills with modern design and naval architecture that has created the Tayana Dynasty 72.
Specifications, with Equipment and Information:
- Length: 72' 0"
- LOA: 72' 0"
- Displacement: 96100 lbs
- LWL: 60' 10"
- Ballast: 24850 lbs
- BEAM: 20' 0"
- DRAFT: 8' 6"
- Ballast: 24850 24850
- Manufacturer: Tayana
- Model: Dynasty
- Designer: Andrew Winch
Hull Structure and Decks
High density foam / 25mm balsaSandwich construction above waterline
The first three layers of hull layup use vinylester resin
(4) Longitudinal stringer on the hull P/S sides
Longitudinal & lateral fiberglass stringers filled w/ high density foam
(20) Transverse floor on the bottom of the hull
Deck is 25mm / 19mm balsa core sandwich layup
White gel coat on exterior
The flange between the deck & the hull bedded w/ 3M 5200
Fastened with S/S bolts of 8mm diameter at 6” center
PU foam is placed between bulkhead & hull to prevent print through
Mast step is made of mild steel
Teak area includes side deck, cap rail, forward sun berth recess, forward cockpit seat, forward cockpit floor, pilot seats, passage on cabin top, aft cockpit seat, aft cockpit floor & transom swimming plate
Non-skid area includes forward cabin top, pilot house top, P/S side of aft cabin top, pilot seat coaming, and life raft locker top
Electronics / Navigation
Machinery and Steering Systems
Cummins 230hp w/ 3 stations instrument panels
One additional 24V 100amp alternator for service system
Racor dual 900 FG fuel filter for ENG.
2” shaft w/ S/S strut
Dripless stern tube w/ Max. propeller
(2) Intake & (2) outtake blowers
Analogue type Wema fuel gauge w/ sender for fuel & water tank
Sound down 2” thick lean foam lamination sound. Insulation w/ white aluminum sheet
Steering system w/ luxury pedestal
Single electric Eng. Control
36” S/S steering wheel w/ suite cover
3 1/4” S/S rudder stock
20hp bow thruster
Color coded piping for fuel, water & sea water system
Generator w/ gas water separator
Chilly water system w/ Ecu control
Heavy duty batteries AGM8D batteries for engines & service system & 4D for generator
2000W inverter / charger w/ remote control
Marine grade tinned copper wiring
Washer & dryer
Volt & AMP digital meter
Dimmers for salon & MSR ceiling
24V for lighting & DC equipment
Spare conduit ru
Sails and Rigging
Mast & Sails to be quoted by depending on client’s individual request
(Not included in Standards pricing)
Interior Finish and Details
Teak paneling & cabinetry
Soft vinyl headliner
Push-button handles for drawer & cupboard
Arch corner cabin entrance door
Hidden hinges on cabinet doors
Teak & holly floor for whole interior
Brass or S/S hardware
Removable headliner on entire boat
Exterior Hardware and Fittings
S/S oval port light
Lewmar ocean hatch or Equal w/ sunshield & screen
Winches: Lewmar or EqualPrimary winches: --------------------------- (2) Lewmar 77 CEST electric- Secondary winches: ------------------------ (2) Lewmar 68 CEST electric- Main sheet winch: -------------------------- (1) Lewmar 58 CEST electric- Primary halyard: ---------------------------- (1) Lewmar 58 CST Twin Speed- Main halyard: -------------------------------- (1) Lewmar 54 CST Twin Speed All exterior S/S fitting to be 316
11/4” stanchion 32” height w/ S/S bare lifeline
Lewmar V4 or Equal windlass dual direction w/ remote control
Dual anchor rollers w/ 150 Lbs anchor (C.Q.R.)
W/ 300’ 1/2” HT anchor chain
A total of (8) S/S round type, high legged, 15” mooring cleats; (2) in the bow, (4) at midship and (2) at the stern
All deck track & traveler use Lewmar or Equal
(6) Dorade vents w/ cowl vent guard
Zincs at bottom of hull
Aft deck shower at transom area
Please call or email us with any questions.
326 1st Street, Suite 405
Annapolis, MD 21403
Details of this vessel are offered in good faith by the Company. The
Information cannot be guaranteed; therefore it is up to the Buyer, his Agents,
or his Surveyors to verify.
Make an Offer Anytime!!
Check out all the Used Yachts for Sale, Used Powerboats for Sale or Used Boats for Sale in the Special Sections...
Just click "Email Us" from the Listing Above
~ Make an Offer ~ Get A Great Deal ~
Remember to Email Your Offer!!